CNC Vertical Machining Center [BF-850V]
1)Casting is made by advanced Meehanite. Such material is very stable; It can make sure there is no distortion after long-term use.
2)We design a strong structure to build columns, avoid and reduce distortion while cutting.
3) Nut integrated design
Nut block for screw and main machine body are built together for every axis, with this design, the machine will get better rigidity, and won't lose precision while heavy cutting and acceleration movement impact
4)Adopt 4-6 slide blocks for single axis
Adopt 4-6 slide blocks for single-axis will enhance load capacity by around 30%, with this method will improve the load capacity.
5)Optimized structure of heavy rail linear guide
Comparing with the ball screw guide, its lead capacity and damping properties have been improved 30% and 15% respectively: Comparing with hard track guide, dynamic motion function has been improved 300%, at the same condition, the machining efficiency will be 2%-15% better, the life of the machine will be 3-6 times longer, so without shutting the machine down to repair, it will save 5-20% precious time
6) High precision
The belt drive spindle can provide RPM10000. A specially designed spindle configuration, show us the outstanding rigidity of the principal head.
Precious ball screw assembly is adopted for X, Y, and Z-axis, such screw is pre-processed to ensure the best precision and minimize the error.
7). Advantage of system
1. MITSUBISHI choose M80B control system, not only improve data processing speed, but also raise machining efficiency obviously.
2. Most advanced hardware is adopted, it is an advantage to enhance the ability of high-speed processing and the ability of compensation,
3. System supports various languages and can be used worldwide.
Servo system
Swift response and stable location loop control system will be most beneficial while machining process, it also realizes stable control of speed up and speeds down.
1. Adoption of the medium and small model servo motor and high-resolution decoder
2. Enhance the rigidity of machine tool
3. Special characteristics in stable control of speeding up and down
4. Reduce parts processing time and improve the machining precision of parts.
| ravel/space |
X/Y/Z axis travel |
mm |
800/500/500 |
Standard accessories
BT40-12000rpm direct-drive spindle
BT40-24T circular tool magazine
the strong rear-facing chip-removal device, do the cleaning without shutdown.
The fourth axis interface
Standard accessory
Oil-water separators
Optional accessories
12000/15000rpm direct-drive spindle
the fourth axis of rotation
Servo tool magazine
Pneumatic clamping interface
Nitrogen storage and distribution of the head
|
| Table upper surface to spindle nose end face |
mm |
130-630 |
| Table to spindle nose |
mm |
4520 |
| Accuracy |
Positioning |
mm |
± 0.003 |
| Repeatability |
mm |
± 0.002 |
| Table |
Table dimension |
mm |
900*500 |
| Max. load on the table |
Kg |
600 |
| Power(X Y Z) |
KW |
3/3/3(Mitsubishi) |
| Spindle |
Spindle speed |
rpm |
12000 |
| Traverse speed |
Rapid speed |
mm/min |
48000 |
| Auto changing tool system |
Tool holder model |
|
BT40 |
| Tool capacity |
pcs |
24 |
|
| Spindle motor |
Spindle power |
KW |
11 |
| Outer size and weight |
Machine height |
mm |
2520 |
| Floor space |
mm |
2500*2450 |
| Net weight |
Kg |
6000 |
Audited Supplier 
){kind=link}
){kind=link}